Four Connection Methods Of Pipeline Electromagnetic Flowmeter

Here is Flow Meter China Manufacturer talking about Four connection methods of pipeline electromagnetic flowmeter.

If you have any idea about it, welcome to contact us and discuss.

The universal Intelligent Electromagnetic Flowmeter consists of two parts: a sensor and a converter. It is based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow of conductive liquid. It is a speed meter. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volumetric flow rate of strong corrosive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, slurry, and pulp. Widely used in petroleum, chemical, metallurgy, textile, paper, environmental protection, food, and other industrial sectors and municipal management, water conservancy construction, river dredging and other fields of flow measurement.

Pipeline electromagnetic flowmeters are connected differently from pipes, and the connection methods are as follows:

First, flange connection: flange connection is the common connection method. There are flanges that can be connected at both ends of the electromagnetic flowmeter. When connecting with the pipeline, just put the flanges on both ends of the electromagnetic flowmeter and the pipeline. The flanges are bolted and this connection can be installed in one direction.

Second, the clamp connection: some electromagnetic flowmeters without their own flanges use this connection, can be clamped between the two flanges of the pipe, the connection is relatively simple.

Third, threaded connection: There are also some small-caliber electromagnetic flowmeters that use threaded connections, which are commonly used in the medical and food industries. In addition, this method has some applications in petroleum and exploration.

Fourth, the clamp connection: Now some small-diameter pipes are connected by clamps, and the clamp connection also becomes a sanitary connection. Through this connection, the electromagnetic flowmeter can be quickly installed and disassembled for daily maintenance.

At the same time, Flow Meter Manufacturer can be offered for you.  Looking forward to receiving your inquiry.